Check for Clogged Pipes
Low water pressure could exist because you have clogged pipes with a build-up of hard water, sediment, or minerals. In this case, you'll have to clean out your pipes. Increasing the water pressure won't help, but it could cause water system damage if there are clogged pipes. Not only that, but you could spend a lot of time and money trying to change the pressure control switch (mentioned below) when that's not even the problem. That is why you must be certain that the problem is not a clogged pipe before trying something else. Next, check to see that all of the faucets and shower heads are also clean and clear of buildup that could be blocking water flow. If they're clogged, take the time to clean them off.
Install Contant pressure System
If you know clogged pipes are not an issue and you notice that whenever you're running water from more than one tap and the water pressure drops, the solution could be as simple as installing a constant water pressure system. This will keep your well water pressure constant, even when you use more than one faucet at a time.
Fortunately, a constant water pressure system is pretty easy to install, too. You can install it on the line where your water enters your home, usually in the basement. This can also be used if the height of your building is impacting the water pressure on the upper floors or if your water pressure tank and pump are too far away from the point of water use.
Adjust The Pressure Tank
Another solution is to adjust the pressure tank. Pressure tanks have gauges that will tell you how much pressure is flowing through your pipes. If it's below 40 psi, you might want to increase it. Just remember to not adjust it to above 60 psi because that could cause water pipe breakage, leaks, and switch failure.
To adjust the pressure tank, first turn off the circuit breaker, which supplies power to the well pump. Once that's done, locate the air fill valve on top of the pressure tank. This valve is much like a tire valve. To find out what the psi currently is, attach a tire pressure gauge to get the pressure reading. For more info contact pressure vessel supplier in dubai or call us at +971 4 252 2966