If you have low water pressure in the shower then you will know that it is not a good way to start your day.The struggle to wash properly, the water cooling down before it reaches your body, the shampoo that you can never seem to rinse from your hair. So frustrating.
Fortunately, if you are suffering from low water pressure in the shower, there are a range of quick fixes that can improve the flow of water in your shower.
Cleaning out the sediment
Replacing the shower head
Installing a shower pump
Installing a pressurised unvented cylinder
Fitting an electric shower
Now, if you’re new to the plumbing world, this is where things can get a little complicated.
No doubt you’re wondering:
“How do I install a shower pump? How do I clean out the sediment? And what even is a pressurised unvented cylinder?”
All questions that are likely to overwhelm someone new to the plumbing world.
That’s why we’ve created this complete guide to increasing water pressure in your shower.
Taking you step-by-step through the world of low water pressure, we answer every question we’ve ever been asked about increasing pressure in the shower, so you can find the answer to your queries.
Do I have low water pressure in the shower?If you think you have low water pressure issues in the shower, and you’re considering the purchase of a shower pump or power shower to improve the pressure, there is a simple three step test that you can conduct to test your flow.
All you need to carry out this test is: a measuring jug, a timer and a calculator.
*Note* We also recommend getting a qualified plumber to assess the requirements needed for your home.
How to test water pressure for showerStep 1:
Place a 1-litre measuring jug under shower
Turn the problem tap or shower on full
Time how long it takes to fill the jug
If it takes more than 6 seconds to fill the jug, then you have low water pressure.
What causes low water pressure in the shower?Low water pressure at the shower head can occur for a wide variety of reasons.
The most common reasons are:
Your mains water system may be using old piping.
If you live in or close to a city or town centre, then it’s likely that your low water pressure is caused by the mains water system.
This is due to mains water systems in city and town centres using much older pipes.
It is also harder for local government to replace the piping due to the disruption it would cause in a city centre.
Your home water system may have undersized supply piping.
One of the most common reasons for low water pressure is undersized supply piping.
This is common in older houses where the original plumbing system is still in place. This will restrict the amount of water coming into your home and to the shower.
Again, it is quite disruptive to replace so it’s likely previous homeowners have not fixed the issue.
Your home water system may be clogged
Again, if you live in an older house, then you may be using old, iron piping in your home water system.
Iron is vulnerable to rusting which can break off and cause an obstruction within the pipe.
This issue will often be made worse if dirt, gravel or sand enters your system through older entry piping.
You have a “flow restricting” or “water saving” shower head
One common reason that is often overlooked is the shower head. Modern showers often use “flow restricting” or “water saving” shower heads.
Flow restricting shower heads were first introduced under The National Energy Act in the United States.
Many manufacturers in the UK have followed the example set by the US and are now installing water restrictors in an attempt to help homeowners reduce water bills and stop people wasting water.
You have an obstructed shut off valve
Another common reason that you may be experiencing low water pressure is an obstructed shut off valve.
If you’ve just bought a new home, or you’ve recently had building work done, then you should check that your shut off valve is fully open.
The shut-off valve is usually located under the kitchen sink. If you believe the water valve to be broken, contact a plumber immediately.
For more info contact booster pump set suppliers in uae or call us at +971 4 252 2966.
If you have low water pressure in your home then you will know it can be a real pain.
The morning shower will lack any real power, washing the dishes can take hours and the bathtub... don’t even get us started on how long it takes to fill the bathtub. Forever!
Fortunately, if you are suffering with any of the problems listed above, you don’t have to continue living this way.
In most cases, low water pressure in the home can easily be solved by installing a home booster pump - a sort of small mechanical tool that can easily be installed on to your home’s plumbing system.
Now, if you’re new to the plumbing and pumping world, this is where things can get a little complicated.
No doubt you’re wondering:
“What is a booster pump?”... “How does it all work?”... “Do I really need a pump?”
All questions that are likely to overwhelm someone new to the pumping world.
That’s why we’ve created this complete guide to buying a booster.
What is a booster pump?A booster pump is a small mechanical device that can be connected to your home’s plumbing system. The pump is capable of recognising when pressure and flow are low, and it can automatically boost the performance of incoming mains water supply.
Simply put, if you frequently experience low water pressure when using taps, shower heads or other appliances in your home, a booster pump can increase the pressure of the water.
How does a booster pump work?Step 1:
The booster pump draws fluid into the pump through the mains supply or break tank (an inlet).
When water enters the chamber of the pump, the pump activates the impellers.
The impellers then spin at a high rate boosting the pressure of the water before exiting through the outlet.
Booster pumps come in various designs depending on the brand and can work with single or multiple impellers.
Take a look at the GIF diagram below. As you can see, the water enters the pump at 0.7 bar. When the water enters the pump, the impellers spin boosting the pressure of the water. The water then exits the pump at 2.2 bar.
What are the important features of a booster pump?There are four important features of a booster pump that you should be aware of when making a purchase decision. These are:
Do I need a booster pump?If you think you have low water pressure issues, and you’re considering the purchase of a booster pump, there is a simple three step test that you can conduct to test your flow. All you need for this to contact booster pump set uae or call us at +971 4 252 2966.
Increased pressure at the fixtures Obviously, people like to have consistent pressure when taking a shower. Just ask Kramer. We won’t diagnose why that is, but let’s take it as an assumption. Insufficient water pressure could conceivably make it harder to wash your dishes or hose down your driveway.
A frequent cause of low water pressure in residences include hard water build up which produces calcium deposits. Older systems with galvanized steel piping can produce rust or other particulates, although this is less common with modern PVC or copper piping. Changing water usage patterns over time, caused by more bodies or more water fixtures in the household can contribute to decreased pressure.
“What we’re seeing a lot is that people are redoing their bathrooms to add something like an additional shower head or body sprayer” says a Pump Products technician. “That counts as an extra water fixture in your home that people forget to factor into their calculations.”
Well Water Circulation For people who rely on well systems for their potable water, booster pumps could be absolutely critical additions in concert with a well pump. The well pump may have enough power to transport water to the dwelling, but it may not have enough to actually circulate the water throughout the system to the fixtures. An improperly sized well pump might not be able to reach the water table.
Lawn Sprinklers If you have an inbuilt lawn sprinkler system you probably need a lot of pressure to reach every part of your lawn. Booster pumps for the sprinkler system can help ensure that every area is well-nourished without sapping your household fixtures of pressure.
For more info contact booster pump set uae or call at +971 4 252 2966
Low water pressure is one of the problems that consistently bedevils residences and businesses alike. Water pressure, not to be confused with water flow at the tap, is simply the force that propels water through the piping system to reach fixtures in the building unit. People desire high water pressure for many different reasons and there are as many different ways to try to achieve it. One way is using a water pressure booster pump set.
Water pressure results from several variables, including the height of the water reservoir, the elevation of the property or premise, the number of people occupying the premise that consume water as well as their consumption rates and the number of water fixtures (sink, toilet, etc.) within the premise.
If you are experiencing low water pressure, perhaps you have tried one of these methods. You might have tried to clean or adjust the aerators in the faucet heads. You have tried retrofitting your pipes to a larger size to increase the volume. You even may have resorted to calling in an inspector from a municipal water service. All to no avail.
Each method has its pros and cons, but if you are looking for a relatively straightforward solution, consider buying a water pressure booster pump. Booster pumps are additions to a system used to increase fluid pressure in that system. A pressure tank stores the water and maintains the pressure within a certain range so that the booster pump is not constantly turning on and off every time you flip your sink handle or flush a toilet. A pressure switch with preset maximum/minimum PSI settings is used to regulate the pump’s activity level.
Booster pumps can be found in both residential and commercial properties, in large homes and small homes, in corner stores and big factories, in farms and in car washes. Some use boosters simply for comfort, while others rely on them to run a business or even for drinking water. Some of the top manufacturers of booster pumps are Goulds, Sta-Rite, Berkeley and Grundfos. Discussed below are some of the most common applications in which booster pumps play a vital role.
For booster pump set uae contact water pump dubai or call us at +971 4 252 2966